Difference between revisions of "Wear Bends"

From SolidsWiki
Jump to navigation Jump to search
m
 
Line 1: Line 1:
[[Category:Piping]]{{Knoppen}}
[[Category:Piping]]{{Knoppen}}
<noinclude><!------------------------------------------------
* READ THIS FIRST
* Only edit this page if you can improve the content.
* Improper use of this page will lead to permanent banning.
* Please do not edit the sponsored link on the top right corner.
* Please start editing this page after the /noinclude
* -------------------------------------------------></noinclude>
[[File:Wear Bends.jpg|thumb|right|Wear Bends]]
[[File:Wear Bends.jpg|thumb|right|Wear Bends]]
'''Wear Bends''' are used for slurry hand-ling in heavy wear applications in the mining processing industry, coal refinement plants, power plants in the steel and cement industries and other applications where high wear resistance is required.
'''Wear Bends''' are used for slurry hand-ling in heavy wear applications in the mining processing industry, coal refinement plants, power plants in the steel and cement industries and other applications where high wear resistance is required.

Latest revision as of 14:11, 12 March 2014

Wear Bends

Wear Bends are used for slurry hand-ling in heavy wear applications in the mining processing industry, coal refinement plants, power plants in the steel and cement industries and other applications where high wear resistance is required.

Wear bends can be manufactured from corrothene or corromide depending on the application. Corrothene is used in most applications where captive wear bends are not likely to be subject to high temperatures and is impervious to moisture which makes it ideally suited to applications in damp and wet conditions, it can be used safely in direct contact with food, it has an extremely low coefficient of friction whilst retaining excellent wear resistant properties. In all, corrothene is the ideal material for captive wear bends in all industries.

Corromide wear bends are suitable for use at more elevated temperatures and where sharp edges such as broken glass or aggregate containing flint are likely to be encountered. Wear bends are usually manufactured from one of the self lubricated grades such as corromide COF (oil impregnated) or corromide CSL (which contains a solid lubricant)