Difference between revisions of "Bucket Diverter Valves"

From SolidsWiki
Jump to navigation Jump to search
(Created page with "Category:Valves{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * Improper u...")
 
Line 7: Line 7:
* Please start editing this page after the /noinclude  
* Please start editing this page after the /noinclude  
* -------------------------------------------------></noinclude>
* -------------------------------------------------></noinclude>
This page is still empty. If you know something about this product, please share your knowledge with others.
 
 
 
The Bucket Diverter Valves are designed for mounting on a gravity discharge line to divert from a single inlet to one of two outlets.Bucket Diverter Valves are used in a wide variety of gravity flow bulk material applications were cross contamination is not a problem. The Bucket Diverter Valves are designed with one diversion leg offset either 30° or 45° from the inlet leg.
 
 
The Bucket Diverter Valve is offered either as 30°diversion leg offset or  45 °diversion leg offset. The change of direction is accomplished by changing the position of the bucket diverter plate from one line to the other by a rotary actuator.
The Bucket Diverter Valve has heavy construction along and the valve's actuator is direct coupled to the bucket shaft . This arrangement distributes torque directly to the bucket shaft, eliminating stress to the valve components.This keeps production loss, downtime and maintenance cost to a minimum.

Revision as of 08:40, 30 December 2012



The Bucket Diverter Valves are designed for mounting on a gravity discharge line to divert from a single inlet to one of two outlets.Bucket Diverter Valves are used in a wide variety of gravity flow bulk material applications were cross contamination is not a problem. The Bucket Diverter Valves are designed with one diversion leg offset either 30° or 45° from the inlet leg.


The Bucket Diverter Valve is offered either as 30°diversion leg offset or 45 °diversion leg offset. The change of direction is accomplished by changing the position of the bucket diverter plate from one line to the other by a rotary actuator.

The Bucket Diverter Valve has heavy construction along and the valve's actuator is direct coupled to the bucket shaft . This arrangement distributes torque directly to the bucket shaft, eliminating stress to the valve components.This keeps production loss, downtime and maintenance cost to a minimum.