Closed Loop Dryers

From SolidsWiki
Revision as of 22:19, 19 August 2012 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Closed Loop Dryers

The Closed Loop Dryers designed as a closed system in which heated air used to dry the materials is continuously recycled within the drying compartment of the dryer without being discharged to the atmosphere, thus increasing the efficiency of the system while preventing the discharge of contaminated vapors to the atmosphere and also conserving energy which would otherwise be required to heat or air-condition the air drawn into the dryer from the building in which the dryer is located.


Working Principle

A regenerative heat exchanger and an atmospheric cooler/condenser are provided in the dryer and condense and remove moisture from the saturated air and transfer the heat of condensation back into the air before the air is reheated and recycled back to the materials to be dried. The drying compartment may comprise an enclosed tunnel through which a rack of superposed trays are conveyed or may comprise some other conveying mechanism.


Aplications

The Closed Loop Dryer employs a proven flash drying technology for tobacco. The closed loop drying and expansion system is a fully automatic process, which produces substantial increases in whole blend or stem expansion over conventional methods of tobacco processing. The use of low pressure superheated steam allows very fast, continuous processing. The key features of the Closed Loop Dryer are improved expansion combined with low degradation, resulting in significant reduction in “loose ends”. The process ensures gentle and uniform handling of tobacco particles, which leads to stable product moisture control.