Discharge Cones

From SolidsWiki
Jump to navigation Jump to search


Discharge Cones

Discharge Cones makes it easy to get your product out of your drum. Simply invert the drum and the product flows out in a controlled manner. See our range of drum hoists and drum tippers.

Discharge cones are also used for large Semi Autogenous Grinding (SAG) and Autogenous Grinding (AG) mills are subjected to high wear as significant volumes of ground ore and slurry exit the mill. With the larger diameter mills of 32ft to 40ft in size becoming the norm, very high, concentrated wear is highlighting the limitations of conventional discharge cones and frequent changes are subsequently required.


Common Sizes of the Cones

Cones are available to fit with the standard drum sizes.

  • 315mm
  • 400mm
  • 457mm
  • 560mm
  • 647mm
  • 750mm


Design Features

  • Safe handling
  • Extended wear life
  • Superior wear material
  • Full cast nose cone
  • Cast installation lugs
  • Cast centre clamping ring
  • "Key" design for installation
  • Weight reduction
  • Improved Liner performance