Pin Crushers

From SolidsWiki
Jump to navigation Jump to search
Pin Crushers

Pin Crushers are specially designed to deal efficiently and economically with a wide range of materials and can be easily adjusted to give the fineness required from a coarse granulation to finely ground powder.

Pin pulverizer grinding is gradualliy done from the centre to the rotor, allowing heavy pieces of material to be reduced by stages to the fineness required. Constructional materials and the operation components are manufactured out of the best applicable raw materials, so as to yield close particle size for a uniform product.

Pin Pulverizer yields greater output in relation to the electrical energy consumed, since the material to be ground is fed automatically in the centre of the rotor by the Feed Hoppers provided with an automatic vibrating tray at the feed gate.


Typical Capacity

  • Permissible Feed Size : Up To 6.00 MM
  • Fineness Achiveable : Up To 120 Mesh or 125 Microns
  • Permissible Hardness : Up To 3 Moh's Scale
  • Permissible Brittleness : Medium to High
  • Permissible Moisture : Up To 3%