Difference between revisions of "Plate Coolers"

From SolidsWiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Category:Cooling]]{{Knoppen}}
<noinclude><!------------------------------------------------
* READ THIS FIRST
* Only edit this page if you can improve the content.
* Improper use of this page will lead to permanent banning.
* Please do not edit the sponsored link on the top right corner.
* Please start editing this page after the /noinclude
*-------------------------------------------------></noinclude>


[[File:Plate cooler.jpg|thumb|right|Plate Coolers]]




[[File:Plate cooler.jpg]]
A '''Plate Coolers''' are simple [[Heat Exchangers ]]that captures the heat of warm milk and transfers it to the cold incoming water. 


In dairy farm’s milk cooling is a significant percentage of electricity costs.Milk leaves a cow’s body at 98 degrees Fahrenheit and needs to be cooled quickly to less than 40 degrees. An in-line plate cooler lowers the milk’s temperature before milk enters the bulk tank to be cooled further. Plate coolers cool milk quickly, which helps lower bacteria counts and is easier on compressors. An in-line cooler is one of the best energy investments in a dairy operation.


==Benefits==


* the milk is pre-cooled - by the time is reaches the refrigerated storage tank.


 
* water that needs heating for varied uses is pre-warmed.
A plate cooler is a simple heat exchanger that captures the heat of warm milk and transfers it to the cold incoming water. There are two distinct benefits: First, the milk is pre-cooled - by the time is reaches the refrigerated storage tank. Second, water that needs heating for varied uses is pre-warmed.
 
 
In dairy farm’s milk cooling is a significant percentage of electricity costs.Milk leaves a cow’s body at 98 degrees Fahrenheit and needs to be cooled quickly to less than 40 degrees. An in-line plate cooler lowers the milk’s temperature before milk enters the bulk tank to be cooled further. Plate coolers cool milk quickly, which helps lower bacteria counts and is easier on compressors. An in-line cooler is one of the best energy investments in a dairy operation.

Latest revision as of 07:22, 4 August 2012



Plate Coolers


A Plate Coolers are simple Heat Exchangers that captures the heat of warm milk and transfers it to the cold incoming water.

In dairy farm’s milk cooling is a significant percentage of electricity costs.Milk leaves a cow’s body at 98 degrees Fahrenheit and needs to be cooled quickly to less than 40 degrees. An in-line plate cooler lowers the milk’s temperature before milk enters the bulk tank to be cooled further. Plate coolers cool milk quickly, which helps lower bacteria counts and is easier on compressors. An in-line cooler is one of the best energy investments in a dairy operation.

Benefits

  • the milk is pre-cooled - by the time is reaches the refrigerated storage tank.
  • water that needs heating for varied uses is pre-warmed.