Radar Detectors

From SolidsWiki
Jump to navigation Jump to search


Radar Detectors

Radar Detector is an electronic device used by motorists to detect if their speed is being monitored by police or law enforcement using a radar gun. Most radar detectors are used so the driver can reduce the car's speed before being ticketed for speeding. Only doppler radar-based devices can be detected — other speed measuring devices including those using ANPR, piezo sensors, and VASCAR technology cannot be detected.LIDAR devices require a different type of sensor, although many modern detectors include LIDAR sensors. Most of today's radar detectors detect signals across a variety of wavelength bands: usually X, K, and Ka. In Europe the Ku band is common as well.

One of the technologies that law enforcement agencies can use to measure the speed of a moving vehicle uses doppler radar to beam a radio waveat the vehicle, and then infer the vehicle's speed by measuring the doppler effect-moderated change in the reflected wave's frequency. Radar gunscan be hand-held, vehicle mounted or mounted on a fixed object, such as a traffic signal. Radar detectors use a superheterodyne receiver to detect these electromagnetic emissions from the radar gun, and raise an alarm to notify the motorist when a transmission is detected. False alarms can occur however due to the large number of devices, such as automatic door openers , that operate in the same part of the electromagnetic spectrum as radar guns.

In recent years some radar detectors have added GPS technology. This allows users to manually store the locations where police frequently monitor traffic, with the detector sounding an alarm when approaching that location in the future. These detectors also allow users to manually store the coordinates of sites of frequent false alarms, which the GPS enabled detector will then ignore. Some GPS enabled detectors can download the GPS coordinates of speed monitoring cameras and red light cameras from the Internet, which are contained in the Trinity database. An interstate traveller could receive an alarm when approaching the location of a speed monitoring camera.

How radar detectors work

The concept of measuring vehicle speed with radar is very simple. A basic speed gun is just a radio transmitter and receiver combined into one unit. A radio transmitter is a device that oscillates anelectrical current so the voltage goes up and down at a certain frequency. This electricity generates electromagnetic energy, and when the current is oscillated, the energy travels through the air as an electromagnetic wave. A transmitter also has an amplifier that increases the intensity of the electromagnetic energy and an antenna that broadcasts it into the air.

A radio receiver is just the reverse of the transmitter: It picks up electromagnetic waves with an antenna and converts them back into an electrical current. At its heart, radio is just the transmission of electromagnetic waves through space.Radar is the use of radio waves to detect and monitor various objects. The simplest function of radar is to tell you how far away an object is. To do this, the radar device emits a concentrated radio wave and listens for any echo. If there is an object in the path of the radio wave, it will reflect some of the electromagnetic energy, and the radio wave will bounce back to the radar device. Radio waves move through the air at a constant speed , so the radar device can calculate how far away the object is based on how long it takes the radio signal to return.

Radar can also be used to measure the speed of an object, due to a phenomenon called doppler shift. Like sound waves, radio waves have a certain frequency, the number of oscillations per unit of time. When the radar gun and the car are both standing still, the echo will have the same wave frequency as the original signal. Each part of the signal is reflected when it reaches the car, mirroring the original signal exactly.But when the car is moving, each part of the radio signal is reflected at a different point in space, which changes the wave pattern. When the car is moving away from the radar gun, the second segment of the signal has to travel a greater distance to reach the car than the first segment of the signal. This has the effect of stretching out the wave, or lowering its frequency. If the car is moving toward the radar gun, the second segment of the wave travels a shorter distance than the first segment before being reflected. As a result, the peaks and valleys of the wave get squeezed together: The frequency increases.

Based on how much the frequency changes, a radar gun can calculate how quickly a car is moving toward it or away from it. If the radar gun is used inside a moving police car, its own movement must also be factored in.