Difference between revisions of "Rotating Butterfly Valves"

From SolidsWiki
Jump to navigation Jump to search
(Created page with "Category:Valves{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * Improper u...")
 
 
Line 1: Line 1:
[[Category:Valves]]{{Knoppen}}
[[Category:Valves]]{{Knoppen}}
<noinclude><!------------------------------------------------
[[File:Rotating Butterfly Valve.jpg|thumb|right|Rotating Butterfly Valves]]
* READ THIS FIRST
'''Rotating Butterfly Valve''' consists of disc rotating in trunnion bearings. In the open position the disc is edge-on, offering minimum resistance to flow. In the closed position it is rotated againt a seat.They are particularly attractive because they take up little more room than the pipe flange. Infact some [[Butterfly Valves]] are designed specially for insertion between pipe [[Flanges]], using through bolts. These are know as wafer butterfly valve. Other types are nomally single-flanged or double-flanged, know also as lug-body valves.
* Only edit this page if you can improve the content.
 
* Improper use of this page will lead to permanent banning.
 
* Please do not edit the sponsored link on the top right corner.
Rotating butterfly valve movement is simple and straightforward, requiring only 90 degree rotation of the butterfly for full movement . The main disadvantage is that a simple butterfly design is difficult to render completely tight when closed, due to the absence of any wedging effect in this plane. This can be alleviated to a certain extent by seating the butterfly on a resilient ring on closure and/or offsetting the axis of rotation slightly so that, as well as rotating, as well as rotating, the blade has a movement in a plane at right angles to the spindle axis.
* Please start editing this page after the /noinclude
* -------------------------------------------------></noinclude>
This page is still empty. If you know something about this product, please share your knowledge with others.

Latest revision as of 22:49, 12 January 2013

Rotating Butterfly Valves

Rotating Butterfly Valve consists of disc rotating in trunnion bearings. In the open position the disc is edge-on, offering minimum resistance to flow. In the closed position it is rotated againt a seat.They are particularly attractive because they take up little more room than the pipe flange. Infact some Butterfly Valves are designed specially for insertion between pipe Flanges, using through bolts. These are know as wafer butterfly valve. Other types are nomally single-flanged or double-flanged, know also as lug-body valves.


Rotating butterfly valve movement is simple and straightforward, requiring only 90 degree rotation of the butterfly for full movement . The main disadvantage is that a simple butterfly design is difficult to render completely tight when closed, due to the absence of any wedging effect in this plane. This can be alleviated to a certain extent by seating the butterfly on a resilient ring on closure and/or offsetting the axis of rotation slightly so that, as well as rotating, as well as rotating, the blade has a movement in a plane at right angles to the spindle axis.