Difference between revisions of "Rupture Disc Holders"
(Created page with "Category:Explosion Safety{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * ...") |
PurplePen19 (talk | contribs) |
||
| Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
[[File:Rupture Disc Holders_1.jpg|thumb|200px|right|Rupture Disc Holders]] | |||
[[File:Rupture Disc Holders_2.jpg|thumb|200px|right|Bolted Type Series]] | |||
[[File:Rupture Disc Holders_3.jpg|thumb|200px|right|Screw Type Series]] | |||
[[File:Rupture Disc Holders_4.jpg|thumb|200px|right|Union Type Series]] | |||
'''Rupture Disc Holders''' are commonly constructed with solid PTFE resin insert pressed into inner diameter of stainless steel holder. When used with fluoropolymer lined rupture disk, only fluoropolymer is in contact with corrosive media. Aggressive corrosive materials can damage rupture disk holders, leading to premature failure which disrupts processing with increased maintenance downtime. | |||
==Typical Types== | |||
===Bolted Type Series=== | |||
The typical Conventional Bolted Type Rupture Disc Holder is a two-piece unit consisting of a base flange (inlet) and a holddown flange (outlet). The 30° angular seating surfaces of these flanges are machined to grip Conventional P/CPV and HO/HOV Series Rupture Discs. When assembled, the crown (bulged portion) of the disc protrudes into the hold down flange and a metal to metal seal is provided. | |||
===Screw Type Series=== | |||
The typical Screw Type Rupture Disc Holder (without rupture disc) is a three-piece unit consisting of a base (inlet), hold down ring, and an outlet nut. When assembled, with rupture disc in place, the crown of the disc protrudes into the hold down ring. The base and hold down ring grip the rupture disc while the outlet nut provides the compression necessary to create a metal to metal seal. | |||
===Union Type Series=== | |||
The typical Union Type Rupture Disc Holder is a three-piece unit consisting of a base flange (inlet), a hold down flange (outlet) and a union nut. The 30° angular seating surfaces of these holders are machined to grip Conventional Pre-bulged P/CPV Series and HO/HOV Series Rupture Discs. The base and hold down flanges grip the rupture disc while the union nut provides the compression necessary to create a metal-to-metal seal. | |||
==Related Video== | |||
<youtube>eJ93acRvGOE</youtube> | |||
Latest revision as of 04:23, 19 September 2012
Rupture Disc Holders are commonly constructed with solid PTFE resin insert pressed into inner diameter of stainless steel holder. When used with fluoropolymer lined rupture disk, only fluoropolymer is in contact with corrosive media. Aggressive corrosive materials can damage rupture disk holders, leading to premature failure which disrupts processing with increased maintenance downtime.
Typical Types
Bolted Type Series
The typical Conventional Bolted Type Rupture Disc Holder is a two-piece unit consisting of a base flange (inlet) and a holddown flange (outlet). The 30° angular seating surfaces of these flanges are machined to grip Conventional P/CPV and HO/HOV Series Rupture Discs. When assembled, the crown (bulged portion) of the disc protrudes into the hold down flange and a metal to metal seal is provided.
Screw Type Series
The typical Screw Type Rupture Disc Holder (without rupture disc) is a three-piece unit consisting of a base (inlet), hold down ring, and an outlet nut. When assembled, with rupture disc in place, the crown of the disc protrudes into the hold down ring. The base and hold down ring grip the rupture disc while the outlet nut provides the compression necessary to create a metal to metal seal.
Union Type Series
The typical Union Type Rupture Disc Holder is a three-piece unit consisting of a base flange (inlet), a hold down flange (outlet) and a union nut. The 30° angular seating surfaces of these holders are machined to grip Conventional Pre-bulged P/CPV Series and HO/HOV Series Rupture Discs. The base and hold down flanges grip the rupture disc while the union nut provides the compression necessary to create a metal-to-metal seal.
Related Video