SolidsWiki - User contributions [en]

Aero Mechanical Conveyors

2023-05-16T10:41:18Z

Admin:

[[Category:Pneumatic Transport]]{{Knoppen}}
[[File:Aero_Mechanical_Conveyor.jpg|thumb|250px|right|Aero Mechanical Conveyor]]
An '''Aero Mechanical Conveyor''' (AMC) is a type of tubular conveyor that uses a cable and disc assembly to transport materials in a fluidized state. It is one of the most efficient methods of conveying materials based on energy consumption per unit mass.

==Design and operation==

An AMC consists of three main components:

# A '''loading zone''' where the material is fed into the conveyor by a dispenser or a hopper.
# A '''conveying tube''' where the material is carried by a cable and disc assembly that runs at high speed. The discs are made of antistatic plastic material and are spaced at regular intervals on the cable. The discs create small suction chambers that fluidize the material and prevent segregation or degradation of the product.
# An '''unloading zone''' where the material is discharged by centrifugal force through an outlet.

The AMC operates at any angle from 0° to 90° without loss of capacity¹⁴. It can also convey materials vertically and horizontally within the same unit, or around corners by using specially designed sprockets¹. The AMC can have multiple inlets and outlets to allow for flexible system layout¹⁴.

==Advantages and applications==

The AMC offers several advantages over other types of conveyors, such as:

* High throughput: The AMC can operate at speeds up to 36 ft3/min or 2,160 ft3/hour / 1 m3/min or 61 m3/hr with many products.
* Total transfer: The AMC can completely empty the conveying tube without leaving any residue or waste.
* Gentle conveying: The AMC can handle fragile, cohesive, or abrasive materials without causing damage or wear.
* Dust-free conveying: The AMC is totally enclosed and sealed, preventing any dust emission or contamination.
* Low power consumption: The AMC requires less energy than pneumatic conveyors or other mechanical conveyors.

The AMC can be used for various applications that require fast and efficient conveying of powders, granules, flakes, or pellets. Some examples are:

* Food processing: The AMC can convey flour, sugar, salt, spices, coffee, cereals, snacks, etc.
* Chemical industry: The AMC can convey pigments, resins, fertilizers, detergents, etc.
* Pharmaceutical industry: The AMC can convey tablets, capsules, powders, etc.
* Plastic industry: The AMC can convey pellets, flakes, granules, etc.
* Mineral industry: The AMC can convey cement, lime, gypsum, sand, etc.

Aero Mechanical Conveyors

2023-05-16T10:40:57Z

Admin:

2022-02-25T12:01:57Z

Admin:

File:High Pressure Homogenizers Homogenization chamber performance comparison.jpg

2022-02-25T12:01:21Z

Admin: Admin uploaded a new version of File:High Pressure Homogenizers Homogenization chamber performance comparison.jpg

2022-02-25T11:51:05Z

Admin:

[[File:Genizer_logo.png|right|200px|link=https://www.genizer.com/c/high-pressure-homogenizer_0360|Genizer LLC]]
[[Category:Mixing]]{{Knoppen}}
[[File:High Pressure Homogenizers.jpg|thumb|200px|right|High Pressure Homogenizer]]

'''High Pressure Homogenizers''' are used for homogenization of compounds that require high pressure for the processes. High Pressure Homogenizers are often the solution particularly useful in the pharmaceutical and biotech industries. High pressure homogenizers, prepare nanomaterial by producing high flow velocity through a small orifice, using a specially designed internal fixed geometry under ultra-high pressure (up to 60,000 psi). During the homogenization process, changes in physical, chemical, structural properties occur, and as a result, homogeneous suspension takes place at nanoscale. The pressure of a conventional homogenizer is within 15,000 psi, while a high pressure homogenizer can achieve 30,000 psi, and an ultra-high pressure homogenizer can reach up to 60,000 psi.

=Introduction=
High pressure homogenizers are used in the biological, pharmaceutical, food, chemical, and many other industries. Their products and purposes include cell disruption, food homogenization, fine chemicals, preparation of liposomes, fat emulsions, nanosuspensions, microemulsions, lipid microspheres, vaccines, emulsions, dairy products, infusion solutions, dyes, graphene, carbon nanotubes, conductive coatings, nano-oxide dispersion, and more. The global market for high pressure homogenizers is growing annually, and this is especially true in the nanotechnology market. To prepare pharmaceutical nanoemulsions, high pressure homogenizers such as the nanogenizer are essential: Their pressure is always above 20,000 psi, and they feature high-quality diamond interaction chambers to achieve a uniform, pharmaceutical-grade nanoparticle size distribution.

==Key Principles==
[[File:High Pressure Homogenizers_Interaction chambers.jpg|thumb|200px|right|Interaction chambers]]
[[File:High Pressure Homogenizers_Interaction chambers_2.jpg|thumb|200px|right|Interaction chambers in homogenization unit]]
The key component of a high pressure homogenizer includes a homogenization unit such as diamond interaction chamber, and a high pressure pump unit. There is a specially designed fixed geometry inside the diamond interaction chamber. Strokes of the piston in the high pressure pump unit drive the samples through the interaction chamber at supersonic speed. In the chamber, materials are subjected to mechanical forces such as high shearing, high-frequency oscillation, cavitation and convective impact, and corresponding thermal effects simultaneously. These mechanical and physiochemical effects can induce change in the physical, chemical, and particle structure of the materials. This results in uniform and smaller nanoparticle size, achieving a homogenization effect.
The interaction chamber is the core of the high pressure homogenizer, and its unique geometric internal structure is the main factor determining the effectiveness of the homogenization process. The intensifier pump exerts the required pressure for materials to pass through the interaction chamber at high speed. The pressure’s strength and stability are important to ensure the production of high-quality nanomaterials.

==Applications==
[[File:High Pressure Homogenizers_Interaction_applications.png|thumb|200px|right|Classification of nanotechnology applications]]
The high pressure homogenizer is one of the most effective pieces of equipment for preparing nanomaterial using top-down nanotechnology. The high pressure homogenizer and its interaction chamber have a wide variety of applications in the production of nanomaterial and nanotechnology.

These applications include:
* Preparation of fat emulsion, microemulsions, liposomes, nanosuspensions, and nanoparticles in the pharmaceutical industry;
* Cell disruption, microcapsules, and vaccine adjuvants in biotechnology products;
* Homogenization and emulsification in the food and beverage industry to improve stability, taste, appearance, and encapsulation of nutrients in food products;
* Homogeneous dispersion of products in the cosmetics, fine chemical, and other industries to improve product functionality, increase value, and ensure process stability;
* Dispersion and exfoliation of conductive paste, resistance paste, graphene, carbon nanotubes, and nano-oxides.

==Classification==

===By energy source===

====Electric====
[[File:High_Pressure_Homogenizers_electric.jpg|thumb|200px|right|Electric high pressure homogenizer with intensifier]]
Electric homogenizers are powered by an electric motor. This category of homogenizer can be further subdivided into two types: direct-drive and intensifier.

====Direct-drive type====
The motor drives the crankshaft to move the plunger back and forth, directly pressurizing the material. Multiple plungers in the crankshaft work together to produce constant pressure and a high flow rate; large quantities of materials are required to produce the constant pressure. To drive the crankshaft, the motor requires a multi-stage gear reduction mechanism, which makes the equipment large in size. The homogenizer with a crankshaft is suitable for large-scale production with low-pressure applications.

====Intensifier type====
In intensifier-type high pressure homogenizers, the motor drives the intensifier to pressurize the material through the interaction chamber. The intensifier system can provide higher pressure, thereby improving the performance of the homogenization process. The flow rate of the homogenizer with an intensifier is lower than it is for the homogenizer with a crankshaft, smaller amounts of materials are required, and the pressure is higher. It can be used for laboratory applications with small amounts sample, and for production applications with high pressure. When equipped with the diamond interaction chamber, the electric high pressure homogenizer with an intensifier falls into the category of high-end homogenizers. This type is widely used in biology, pharmaceutical, and nanotechnology laboratories. The traditional intensifier is hydraulic, and the new type of electric cylinder by linear actuator is emerged with more performance.

====Hand Driven====
[[File:High_Pressure_Homogenizers_handdriven.png|thumb|200px|right|Hand-driven high pressure homogenizer]]
Hand driven homogenizers pressurize the material by manual power. The flow rate of a hand homogenizer is small, but it is portable and easy to assemble and disassemble. It requires very small amounts of materials, making it suitable for small-scale experiments. This type of device is capable of supporting biopharmaceutical laboratories’ research and development needs. The manual high-pressure homogenizer is also called the Handgenizer.1

====Air Driven====
The air driven homogenizer converts the pressure of compressed gas into hydraulic pressure. Therefore, it needs the support of a nitrogen cylinder or an air compressor. This homogenizer’s gas consumption and noise levels are high, and its maximum homogenization pressure is generally low. However, since there is no separate intensifier pump structure, its volume is small, and it is suitable for sites equipped with compressed nitrogen.

===By principle and structure of the interaction chamber===
[[File:High_Pressure_Homogenizers_principle.png|thumb|200px|right|The three-type principle of high pressure homogenization]]
====First Generation: Impact Type====
'''Cavitation nozzles:''' The main function of this nozzle is cavitation, which leads to the separation of the emulsion and thereby increases the particle size. Under the pressure of the homogenizer, the materials flow into the cavitation nozzle with a very small aperture at several times the speed of sound. Meanwhile, intense friction and collision take place between the particles and the metal valve parts. This friction reduces the service life of the equipment, and the collisions cause metallic particles to fall into the final products.

'''Impact valve:''' The impact valve and impact ring structure moderately reduce local wear and prolong the homogenization chamber’s service life by using tungsten alloy materials. The role of the impact valve is a combination of impact and cavitation. However, its basic principle is the collision of the material in the suspension with the structure of a high-hardness metal (such as tungsten alloy). Therefore, the impact valve still cannot solve the problem of metallic particle residue. By the first decade of the 20th century, most high pressure homogenizers have added impact valve component.

====Second Generation: Interaction Type====
[[File:High_Pressure_Homogenizers_Interaction_chamber.png|thumb|200px|right|Interaction chamber with cooling jacket]]
'''Y-type interaction chamber:''' The Y-type interaction chamber, regarded as one of the most powerful homogenization chambers to date, has been used by several manufacturers in the USA. In these systems, the flow stream is split into two channels that are redirected over the same plane at right angles and propelled into a single flow stream. High pressure promotes a high speed at the crossover of the two flows, which results in high shear, turbulence, and cavitation over the single outbound flow stream. With the unique Y-type structure, the high-speed moving materials in the high-pressure solution collide with each other, in a process that greatly improves the service life of the chamber over those with more conventional designs. The use of diamond material prevents the formation of metal particle residue.

The Y-type interaction chamber is widely used in the preparation of pharmaceutical emulsions because it minimizes cavitation and produces exquisite, stable particle size and PDI (poly dispersity index) control ability. Genizer and Microfluidics Corp. are the main manufacturers of the diamond interaction chamber. At present, the Y-type diamond interaction chamber is mainly used in high-end nanotechnology, and it occupies more than 90% of the US pharmaceutical industry. Genizer’s temperature-controlled interaction chamber avoids temperature surges and enables working pressure of up to 60,000 psi.

Low emulsification efficiency and metallic particle residue are two problems caused by homogenization chambers designed with the impact principle. When particles collide with internal metal components during the production of pharmaceutical injections, residual inert metallic particles generate. These metallic particles may gather and form larger particles. In pharmaceutical applications, this is a problem because large particles will lead to a decrease in capillary blood flow, which in turn will cause mechanical damage to tissues in the human body, causing acute or chronic inflammation. The interaction chamber solves the problems of particle residue and demulsification. However, the chamber’s internal structure means that when the products’ concentration and viscosity are high, the chamber is more prone to cause flow blocking than impact homogenizers are.

===By principle of pressurization===
The ultra-high pressure homogenizer needs a large thrust to push the piston in the cylinder to achieve high pressure levels. The rotating motor needs to reduce the speed, increase the torque, and convert the linear motion to obtain the linear reciprocating motion with high thrust. The principle of pressurization operates differently in direct-drive type and intensifier-type homogenizers.

====Direct-drive type====
[[File:High_Pressure_Homogenizers_direct-drive.jpg|thumb|200px|right|Internal structure diagram of direct-drive type homogenizer]]
The motor drives the crankshaft to move the plunger back and forth and directly pressurize the material. Multiple sets of plungers provide constant pressure, and the flow rate is high for this type of homogenizer. However, the minimum material requirements are also high, as is the amount of residual produced. The crankshaft driven by the motor needs a multi-stage gear reduction mechanism, which limits these homogenizers to only moderate efficiency and requires large unit dimensions. This homogenizer type is suitable for the food and chemical industries, as well as other applications that do not have high pressure requirements.

====Intensifier type====
[[File:High_Pressure_Homogenizers_hydraulic_type-quad_pump.jpg|thumb|200px|right|Structural diagram of hydraulic type-quad pump with constant pressure]]
The intensifier-type homogenizer is the result of the development of ultra-high pressure technology in recent years. One of its mechanisms involves the motor driving the oil pump to pressurize the material through the hydraulic system. The pressure provided by the hydraulic system is higher than in direct-drive homogenizers, while the volume and the minimum material requirement is smaller. The intensifier-type homogenizer can be applied to both laboratory and production homogenizers with high pressure. Hydraulic homogenizers are expensive, but the hydraulic intensifier can achieve low-frequency and high-thrust piston movement, which increases the machine’s service life and reduces its maintenance costs. Using parallel four-cylinder technology, stable pressure can be obtained without an accumulator, achieving ultra-high pressure of up to 45,000 psi.

In the past, most high pressure homogenizers were the direct-drive type, but this type’s disadvantage is obvious. Its service life is short, and its wearing parts need frequent maintenance, especially those pressure-bearing parts when the pressure is above 100 MPa. Hydraulic homogenizers have a high manufacturing cost, but they also offer a long service life and lower maintenance costs for wearing parts.

==Processes==
Homogenization is a fluid mechanical process that involves the subdivision of particles or droplets into micron sizes to create a stable dispersion or emulsion for further processing.

This is an important stage in the treatment of food and dairy products. It provides improved product stability, shelf life, digestion, and taste. Homogenizing can also significantly reduce the amount of additives required. It prepares feeds so that subsequent spray drying produces the best quality of powders. This is especially important for baby foods and many dairy and food products.

The process occurs in a special homogenizing valve, the design of which is the heart of the homogenizing equipment. The fluid passes through a minute gap in the homogenizing valve. This creates conditions of high turbulence and shear, combined with compression, acceleration, pressure drop, and impact. Causing the disintegration of particles and dispersion throughout the product.

After homogenization, the particles are of a uniform size, typically from 0.2 to 2 micron, depending on the operating pressure. The homogenizer is the most efficient device for particle and droplet size reduction. The actual properties of the product vary with pressure and product type in a complex relationship. In general, higher processing pressure produces smaller particles, down to a certain limit of micronization.

==Video==
<youtube>hcFtEDkFDAM</youtube>