Conical Dryers - Revision history

Helal at 13:05, 4 August 2012

2012-08-04T13:05:38Z

← Older revision		Revision as of 07:05, 4 August 2012
Line 9:		Line 9:


	==~~'''~~Operational Mechanism~~'''~~==		==Operational Mechanism==
	Once the product is fed into the manhole to the desired capacity, clamps seal the cover and rotation begins. As the CDB revolves, the top layer of the product rolls down toward the opposite cone and is followed by the entire mass. The conical walls deflect the product toward the center producing a constantly changing cross section of material that blends as it dries. The jacket surrounding the vessel contains a heating medium that is circulated by means of a rotary joint or through the center of the support shaft. A vacuum tube removes vapors formed by the heated jacket.		Once the product is fed into the manhole to the desired capacity, clamps seal the cover and rotation begins. As the CDB revolves, the top layer of the product rolls down toward the opposite cone and is followed by the entire mass. The conical walls deflect the product toward the center producing a constantly changing cross section of material that blends as it dries. The jacket surrounding the vessel contains a heating medium that is circulated by means of a rotary joint or through the center of the support shaft. A vacuum tube removes vapors formed by the heated jacket.


	==~~'''~~Advantages~~'''~~==		==Advantages==
	* Anti-corrosion, when the dry solution is not chemically neutral.		* Anti-corrosion, when the dry solution is not chemically neutral.
	* Fire polished and non-sticking, greatly reducing of eliminating the tendency of solids to stick to vessel wall.		* Fire polished and non-sticking, greatly reducing of eliminating the tendency of solids to stick to vessel wall.
Line 25:		Line 25:


	==~~'''~~Options~~'''~~==		==Options==
	* Adjustable lump breakers (choppers) for materials that tend to become lumpy.		* Adjustable lump breakers (choppers) for materials that tend to become lumpy.
	* Insulation and special coating.Heated cover to prevent condensation.		* Insulation and special coating.Heated cover to prevent condensation.
	* "Clean room" version with minimized dead zones and remote control for filling, emptying and cleaning functions.		* "Clean room" version with minimized dead zones and remote control for filling, emptying and cleaning functions.
	* Stainless steel design available.		* Stainless steel design available.

Helal at 11:34, 2 August 2012

2012-08-02T11:34:17Z

← Older revision		Revision as of 05:34, 2 August 2012
Line 9:		Line 9:


	==='''Operational Mechanism'''===		=='''Operational Mechanism'''==
	Once the product is fed into the manhole to the desired capacity, clamps seal the cover and rotation begins. As the CDB revolves, the top layer of the product rolls down toward the opposite cone and is followed by the entire mass. The conical walls deflect the product toward the center producing a constantly changing cross section of material that blends as it dries. The jacket surrounding the vessel contains a heating medium that is circulated by means of a rotary joint or through the center of the support shaft. A vacuum tube removes vapors formed by the heated jacket.		Once the product is fed into the manhole to the desired capacity, clamps seal the cover and rotation begins. As the CDB revolves, the top layer of the product rolls down toward the opposite cone and is followed by the entire mass. The conical walls deflect the product toward the center producing a constantly changing cross section of material that blends as it dries. The jacket surrounding the vessel contains a heating medium that is circulated by means of a rotary joint or through the center of the support shaft. A vacuum tube removes vapors formed by the heated jacket.


	==='''Advantages'''===		=='''Advantages'''==
	* Anti-corrosion, when the dry solution is not chemically neutral.		* Anti-corrosion, when the dry solution is not chemically neutral.
	* Fire polished and non-sticking, greatly reducing of eliminating the tendency of solids to stick to vessel wall.		* Fire polished and non-sticking, greatly reducing of eliminating the tendency of solids to stick to vessel wall.
Line 25:		Line 25:


	==='''Options'''===		=='''Options'''==
	* Adjustable lump breakers (choppers) for materials that tend to become lumpy.		* Adjustable lump breakers (choppers) for materials that tend to become lumpy.
	* Insulation and special coating.Heated cover to prevent condensation.		* Insulation and special coating.Heated cover to prevent condensation.
	* "Clean room" version with minimized dead zones and remote control for filling, emptying and cleaning functions.		* "Clean room" version with minimized dead zones and remote control for filling, emptying and cleaning functions.
	* Stainless steel design available.		* Stainless steel design available.

Helal at 20:09, 30 July 2012

2012-07-30T20:09:42Z

← Older revision		Revision as of 14:09, 30 July 2012
Line 7:		Line 7:
	[[File:Conical_Dryers.jpg\|thumb\|200px\|right\|Conical Dryers]]		[[File:Conical_Dryers.jpg\|thumb\|200px\|right\|Conical Dryers]]
	The '''Conical Dryers''' combine an unusual design with a unique material of construction into a unit that uses heat, vacuum, and a gentle tumbling action to dry and blend even the strongest corrosives. The double inverted cone vacuum dryer design ensures a thorough mix and a homogeneous product so that drying is both controlled and fast.		The '''Conical Dryers''' combine an unusual design with a unique material of construction into a unit that uses heat, vacuum, and a gentle tumbling action to dry and blend even the strongest corrosives. The double inverted cone vacuum dryer design ensures a thorough mix and a homogeneous product so that drying is both controlled and fast.


	==='''Operational Mechanism'''===		==='''Operational Mechanism'''===
	Once the product is fed into the manhole to the desired capacity, clamps seal the cover and rotation begins. As the CDB revolves, the top layer of the product rolls down toward the opposite cone and is followed by the entire mass. The conical walls deflect the product toward the center producing a constantly changing cross section of material that blends as it dries. The jacket surrounding the vessel contains a heating medium that is circulated by means of a rotary joint or through the center of the support shaft. A vacuum tube removes vapors formed by the heated jacket.		Once the product is fed into the manhole to the desired capacity, clamps seal the cover and rotation begins. As the CDB revolves, the top layer of the product rolls down toward the opposite cone and is followed by the entire mass. The conical walls deflect the product toward the center producing a constantly changing cross section of material that blends as it dries. The jacket surrounding the vessel contains a heating medium that is circulated by means of a rotary joint or through the center of the support shaft. A vacuum tube removes vapors formed by the heated jacket.


	==='''Advantages'''===		==='''Advantages'''===
	* Anti-corrosion, when the dry solution is not chemically neutral.		* Anti-corrosion, when the dry solution is not chemically neutral.
Line 19:		Line 23:
	* Low operating costs.		* Low operating costs.
	* Wide range of options		* Wide range of options


	==='''Options'''===		==='''Options'''===
	* Adjustable lump breakers (choppers) for materials that tend to become lumpy.		* Adjustable lump breakers (choppers) for materials that tend to become lumpy.

Helal at 16:15, 27 July 2012

2012-07-27T16:15:03Z

@@ Line 5: / Line 5: @@
 * Please start editing this page after the /noinclude
 * -------------------------------------------------></noinclude>
-This page is still empty. If you know something about this product, please share your knowledge with others.
+[[File:Conical_Dryers.jpg|thumb|200px|right|Conical Dryers]]

Admin: Created page with "Category:Drying{{Knoppen}}