Silo Cleaning Systems - Revision history

Admin at 15:07, 22 June 2013

2013-06-22T15:07:59Z

← Older revision		Revision as of 09:07, 22 June 2013
Line 12:		Line 12:
	*'''[[Air Blasters]]''' are a well established cleaning method. Air cannons are expensive, however, as limited coverage requires purchase of multiple units. Air cannons are also noise intrusive and require high consumption of compressed air.		*'''[[Air Blasters]]''' are a well established cleaning method. Air cannons are expensive, however, as limited coverage requires purchase of multiple units. Air cannons are also noise intrusive and require high consumption of compressed air.
	*'''[[Vibrators]]''' are easy to fit into empty silos, but can cause structural damage and contribute to powder compaction.		*'''[[Vibrators]]''' are easy to fit into empty silos, but can cause structural damage and contribute to powder compaction.
	*'''Low friction ~~linings~~''' are quiet, but expensive to install and prone to erosion which can then contaminate the environment or product.		*'''Low friction [[liners]]''' are quiet, but expensive to install and prone to erosion which can then contaminate the environment or product.
	*'''[[Inflatable Pads~~]] and [[liners~~]]''' are easy to install in empty silos and can help side wall build up but have no effect on bridging. Inflatable pads and liners are also hard to maintain and can cause compaction.		*'''[[Inflatable Pads]]''' are easy to install in empty silos and can help side wall build up but have no effect on bridging. Inflatable pads and liners are also hard to maintain and can cause compaction.
	*'''[[Fluidization Pads]]''' can help compacted material, but are expensive and difficult to install and maintain. These systems can also contribute to mechanical interlocking and bridging.		*'''[[Fluidization Pads]]''' can help compacted material, but are expensive and difficult to install and maintain. These systems can also contribute to mechanical interlocking and bridging.
	*'''[[Acoustic Cleaners]]''' are the latest and possibly safest way to clean silos as these systems are non-invasive and do not require silos to be emptied. Acoustic cleaning are also a preventative solution.		*'''[[Acoustic Cleaners]]''' are the latest and possibly safest way to clean silos as these systems are non-invasive and do not require silos to be emptied. Acoustic cleaning are also a preventative solution.

Admin at 15:07, 22 June 2013

2013-06-22T15:07:06Z

Maksud at 18:17, 18 June 2013

2013-06-18T18:17:21Z

@@ Line 1: / Line 1: @@
 [[Category:Cleaning]]{{Knoppen}}
-<noinclude><!------------------------------------------------
+[[File:Silo_Cleaning_System_01.jpg|thumb|right|Silo Cleaner outline]]
-* READ THIS FIRST
+[[File:Silo_Cleaning_System_02.jpg|thumb|right|Silo Cleaner]]
-* Only edit this page if you can improve the content.
+'''Silo cleaning systems''' are specialized systems used to maximize the efficiency of storage silos that hold bulk powders or granules. In silos, material is fed through the top and removed from the bottom. Typical silo applications include animal feed, industrial powders, cement, and pharmaceuticals.
-* Improper use of this page will lead to permanent banning.
-* Please do not edit the sponsored link on the top right corner.
+Free movement of stored materials, on a first-in, first-out basis, is essential in maximizing silo efficiency. The goal of silo efficiency is to ensure that oldest material is used first and does not contaminate newer, fresher material. Two main problems, rat holing and bridging, complicate silo efficiency. When rat holing occurs, powders adhere to the sides of silos. Bridging occurs when material blocks at the silo base.
-* Please start editing this page after the /noinclude
-* -------------------------------------------------></noinclude>
+Manual cleaning, by lowering a worker on a rope to free material, is the simplest way to clean silos. However, manual cleaning is dangerous due to the release of material and the possible presence of gases. In cases of bridging, an additional danger exists as the exit hole needs to be rodded from underneath, exposing the worker to falling powder.
-This page is still empty. If you know something about this product, please share your knowledge with others.

Admin: Created page with "Category:Cleaning{{Knoppen}}

← Older revision		Revision as of 09:07, 22 June 2013
Line 2:		Line 2:
	[[File:Silo_Cleaning_System_01.jpg\|thumb\|right\|Silo Cleaner outline]]		[[File:Silo_Cleaning_System_01.jpg\|thumb\|right\|Silo Cleaner outline]]
	[[File:Silo_Cleaning_System_02.jpg\|thumb\|right\|Silo Cleaner]]		[[File:Silo_Cleaning_System_02.jpg\|thumb\|right\|Silo Cleaner]]
	'''Silo cleaning systems''' are specialized systems used to maximize the efficiency of storage silos that hold bulk powders or granules. In silos, material is fed through the top and removed from the bottom. Typical silo applications include animal feed, industrial powders, cement, and pharmaceuticals.		'''Silo cleaning systems''' are specialized systems used to maximize the efficiency of storage silos that hold bulk powders or granules. In [[silos]], material is fed through the top and removed from the bottom. Typical silo applications include animal feed, industrial powders, cement, and pharmaceuticals.

	Free movement of stored materials, on a first-in, first-out basis, is essential in maximizing silo efficiency. The goal of silo efficiency is to ensure that oldest material is used first and does not contaminate newer, fresher material. Two main problems, rat holing and bridging, complicate silo efficiency. When rat holing occurs, powders adhere to the sides of silos. Bridging occurs when material blocks at the silo base.		Free movement of stored materials, on a first-in, first-out basis, is essential in maximizing silo efficiency. The goal of silo efficiency is to ensure that oldest material is used first and does not contaminate newer, fresher material. Two main problems, rat holing and bridging, complicate silo efficiency. When rat holing occurs, powders adhere to the sides of silos. Bridging occurs when material blocks at the silo base.

	Manual cleaning, by lowering a worker on a rope to free material, is the simplest way to clean silos. However, manual cleaning is dangerous due to the release of material and the possible presence of gases. In cases of bridging, an additional danger exists as the exit hole needs to be rodded from underneath, exposing the worker to falling powder.		Manual cleaning, by lowering a worker on a rope to free material, is the simplest way to clean silos. However, manual cleaning is dangerous due to the release of material and the possible presence of gases. In cases of bridging, an additional danger exists as the exit hole needs to be rodded from underneath, exposing the worker to falling powder.


	==Alternative cleaning methods include:==		==Alternative cleaning methods include:==
	*'''Air ~~blasters~~''' are a well established cleaning method. Air cannons are expensive, however, as limited coverage requires purchase of multiple units. Air cannons are also noise intrusive and require high consumption of compressed air.		*'''[[Air Blasters]]''' are a well established cleaning method. Air cannons are expensive, however, as limited coverage requires purchase of multiple units. Air cannons are also noise intrusive and require high consumption of compressed air.
	*'''Vibrators''' are easy to fit into empty silos, but can cause structural damage and contribute to powder compaction.		*'''[[Vibrators]]''' are easy to fit into empty silos, but can cause structural damage and contribute to powder compaction.
	*'''Low friction linings''' are quiet, but expensive to install and prone to erosion which can then contaminate the environment or product.		*'''Low friction linings''' are quiet, but expensive to install and prone to erosion which can then contaminate the environment or product.
	*'''Inflatable ~~pads~~ and liners''' are easy to install in empty silos and can help side wall build up but have no effect on bridging. Inflatable pads and liners are also hard to maintain and can cause compaction.		*'''[[Inflatable Pads]] and [[liners]]''' are easy to install in empty silos and can help side wall build up but have no effect on bridging. Inflatable pads and liners are also hard to maintain and can cause compaction.
	*'''~~Fluidisation through a one-way membrane~~''' can help compacted material, but are expensive and difficult to install and maintain. These systems can also contribute to mechanical interlocking and bridging.		*'''[[Fluidization Pads]]''' can help compacted material, but are expensive and difficult to install and maintain. These systems can also contribute to mechanical interlocking and bridging.
	*'''Acoustic ~~cleaners~~''' are the latest and possibly safest way to clean silos as these systems are non-invasive and do not require silos to be emptied. Acoustic cleaning are also a preventative solution.		*'''[[Acoustic Cleaners]]''' are the latest and possibly safest way to clean silos as these systems are non-invasive and do not require silos to be emptied. Acoustic cleaning are also a preventative solution.
	*'''~~Pneumatic or Hydraulic Whip Machines~~''' are ~~portable~~ machines used to "cut" build up on the walls of silos ~~while being remotely operated from outside of the vessel.~~		*'''[[Scraper Systems]]''' are machines used to "cut" build up on the walls of silos.
	*'''Silo Cleaning Companies''' provide turn key silo cleaning services using several different kinds of methods(depending on the company).


	~~==Advantages of Silo Cleaning Systems:==~~
	*The Silo Clean System is light weight and portable.
	*Our system will clean chutes, chimneys, large pipes and can do vertical cleaning. Our system is capable of cleaning air slides without damaging them.
	*Many companies spend fortunes modifying their cones, silos and bins for needed free flow; these costs are avoidable with our service. Older containers can be used indefinitely when cleaned with the Silo Clean System.
	*Our cleaning is done 100% dry. A wet silo takes time to dry, which can result in loss of production time. Using water has seasonal draw backs, with silo clean, cleaning can be done all year round.