Difference between revisions of "Serial Motors"
Jump to navigation
Jump to search
(Created page with "Category:Actuators, Drives{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. *...") |
|||
Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
[[File:Serial-motors.jpg|thumb|right|Serial Motors]] | |||
'''Serial Motor''' allows to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant .Serial Motor is a powerful motor controller for use of low-voltage motor movement needs. The serial command interface used to control the motors is very straight forward. A command consists of four characters: the motor number, the direction indicator, the speed constant, and a carriage return. The baud rate of the serial motor is set to 115200bps . |
Latest revision as of 12:04, 5 December 2012
Serial Motor allows to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the direction, and the desired speed constant .Serial Motor is a powerful motor controller for use of low-voltage motor movement needs. The serial command interface used to control the motors is very straight forward. A command consists of four characters: the motor number, the direction indicator, the speed constant, and a carriage return. The baud rate of the serial motor is set to 115200bps .