3,218
edits
(Created page with "Category:Valves{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * Improper u...") |
|||
(One intermediate revision by the same user not shown) | |||
Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
This | [[File:Blade diverter valves.gif|thumb|right|Blade Diverter Valves]] | ||
'''Blade Diverter Valves''' are used to divert the flow of fast moving materials from one direction to another. A number of styles and configurations are available to suit the desired flow path. The blade diverter valves are designed for mounting on a gravity discharge line to divert from a single inlet to one straight through leg or one divert leg and were cross over dusting is minimized. | |||
The blade diverter valve is offered either as 30°diversion leg offset or 45 °diversion leg offset. The change of direction is accomplished by changing the position of the blade from one line to the other by [[Rotary Actuators]].It has heavy construction along and the valve's actuator is direct coupled to the bucket shaft . This arrangement distributes torque directly to the bucket shaft, eliminating stress to the valve components.This keeps production loss, downtime and maintenance cost to a minimum. | |||
Blade diverter valves are typically used to divert the flow of falling abrasive material through a chute and must be rugged enough to withstand these extreme conditions. This valve features heavy-duty construction with all welded joints ground smooth to prevent material build up. | |||
The standard blade diverter valve line is available in a variety of sizes, actuation options, and materials choices. Standard diverter angles and mounting patterns meet the requirements of most applications. |