Difference between revisions of "Air Dryers"

Jump to navigation Jump to search
40 bytes added ,  19:45, 21 July 2012
no edit summary
Line 45: Line 45:
The regeneration of the desiccant vessel can be during three different methods:
The regeneration of the desiccant vessel can be during three different methods:
* Heatless "pressure-swing" drying, which uses part of the dry compressed air coming from the other vessel to dry the desiccant in the vessel being regenerated at lower pressure.
* Heatless "pressure-swing" drying, which uses part of the dry compressed air coming from the other vessel to dry the desiccant in the vessel being regenerated at lower pressure.
* Heated dryer, which uses a hot air blower, so there is no loss of compressed air.
* [[Heated Dryers|Heated dryer]], which uses a hot air blower, so there is no loss of compressed air.
* Heat of compression, which can only be used with an oil free compressor.
* Heat of compression, which can only be used with an oil free compressor.


Line 51: Line 51:
==Membrane dryer==  
==Membrane dryer==  
Membrane dryer refers to a dehumidification membrane that removes water vapor from compressed air.
Membrane dryer refers to a dehumidification membrane that removes water vapor from compressed air.
Typically, the compressed air is first filtered with a high-quality coalescing  filter. This filter removes liquid water, oil and particulate from the  compressed air. The water vapor–laden air then passes through the center  bore of hollow fibers in the membrane bundle. At the same time, a small  portion of the dry air product is redirected along the outside surface  of the fibers to sweep out the water vapor which has permeated the  membrane. The moisture-laden sweep gas is then vented to the atmosphere,  and clean, dry air is supplied to the application. The membrane air  dryers are designed to operate continuously, 24 hours per day, 7 days  per week. Membrane air dryers are quiet, reliable and require no  electricity to operate.
Typically, the compressed air is first filtered with a high-quality [[Coalescing Filters|Coalescing Filter]]. This filter removes liquid water, oil and particulate from the  compressed air. The water vapor–laden air then passes through the center  bore of hollow fibers in the membrane bundle. At the same time, a small  portion of the dry air product is redirected along the outside surface  of the fibers to sweep out the water vapor which has permeated the  membrane. The moisture-laden sweep gas is then vented to the atmosphere,  and clean, dry air is supplied to the application. The membrane air  dryers are designed to operate continuously, 24 hours per day, 7 days  per week. Membrane air dryers are quiet, reliable and require no  electricity to operate.
Some dryers are non-porous, which means they only permeate water  vapor. Non-porous membranes' drying power is only a function of flow  rate, pressure. The sweep flow is strictly controlled by an orifice and  is not a function of temperature.
Some dryers are non-porous, which means they only permeate water  vapor. Non-porous membranes' drying power is only a function of flow  rate, pressure. The sweep flow is strictly controlled by an orifice and  is not a function of temperature.
Porous membranes are modified nitrogen membranes  and pass air as well, usually changing the composition of the  compressed air by reducing the oxygen content. The only maintenance  required is changing the prefilter cartridge twice a year. The  performance of porous membranes are dependent on temperature as well as  operating pressure and flow.
Porous membranes are modified nitrogen membranes  and pass air as well, usually changing the composition of the  compressed air by reducing the oxygen content. The only maintenance  required is changing the prefilter cartridge twice a year. The  performance of porous membranes are dependent on temperature as well as  operating pressure and flow.

Navigation menu