Difference between revisions of "Air Impingement Dryers"

Jump to navigation Jump to search
no edit summary
Line 11: Line 11:




===Operating Principle===
==Operating Principle==
Hot air is made to impinge in a plug flow manner on a moving loosely formed bed of wet feed. Moisture evaporates as the material traverses along the length of the bed and is rendered dry at the discharge end. Humid air is continuously exhausted. The dryer is employed for wet crystals which are very fragile as well for wet performed feeds which are not suitable for the normal belt dryer operation.
Hot air is made to impinge in a plug flow manner on a moving loosely formed bed of wet feed. Moisture evaporates as the material traverses along the length of the bed and is rendered dry at the discharge end. Humid air is continuously exhausted. The dryer is employed for wet crystals which are very fragile as well for wet performed feeds which are not suitable for the normal belt dryer operation.




===Special Features===
==Special Features==
* Suitable for well aerated beds of preformed, crystalline or granular wet feeds.
* Suitable for well aerated beds of preformed, crystalline or granular wet feeds.
* High evaporated efficiencies due to the impingement action in plug flow manner.
* High evaporated efficiencies due to the impingement action in plug flow manner.
Line 26: Line 26:




===Applications===
==Applications==
* Menthol Crystals
* Menthol Crystals
* Yellow Iron Oxide
* Yellow Iron Oxide
Line 33: Line 33:




===Modern Air Impingement Technology===
==Modern Air Impingement Technology==
The ultramodern hot air impingement dryer is used to dry a water based  silicone finish on a spun bonded polyester non woven web that is 210  inches wide. The gas-fired dryer system uses high velocity hot air  impingement nozzles mounted beneath the product to apply hot air to the  web at a right angle. Hot air impingement breaks through the boundary  layer of air that surrounds the moving web and transfers heat to the  product to vaporize liquids in the coating or finish. The turbulence  created also helps to exhaust vapor from the process, which speeds  further drying. Impingement air is exhausted from the dryer through  return tubes, which are evenly spaced across the dryer. High velocity  hot air impingement is extremely effective in applications where large  quantities of water must be removed from a saturated or coated product.
The ultramodern hot air impingement dryer is used to dry a water based  silicone finish on a spun bonded polyester non woven web that is 210  inches wide. The gas-fired dryer system uses high velocity hot air  impingement nozzles mounted beneath the product to apply hot air to the  web at a right angle. Hot air impingement breaks through the boundary  layer of air that surrounds the moving web and transfers heat to the  product to vaporize liquids in the coating or finish. The turbulence  created also helps to exhaust vapor from the process, which speeds  further drying. Impingement air is exhausted from the dryer through  return tubes, which are evenly spaced across the dryer. High velocity  hot air impingement is extremely effective in applications where large  quantities of water must be removed from a saturated or coated product.
The complete dryer system measures 11.75 feet long by 21 feet wide by  11.8 feet high, including the dryer enclosure, blowers, duct work and  structural steel support frames. The dryer enclosure is constructed of aluminized steel with stainless steel trim. Its walls are extensively insulated. Three bolt-on plug doors with handles allow access to the  dryer's interior for maintenance, and two pressure gauges display supply  plenum air pressure.
The complete dryer system measures 11.75 feet long by 21 feet wide by  11.8 feet high, including the dryer enclosure, blowers, duct work and  structural steel support frames. The dryer enclosure is constructed of aluminized steel with stainless steel trim. Its walls are extensively insulated. Three bolt-on plug doors with handles allow access to the  dryer's interior for maintenance, and two pressure gauges display supply  plenum air pressure.

Navigation menu