Difference between revisions of "Driving Drums"

Jump to navigation Jump to search

Driving Drums (view source)

Revision as of 01:05, 14 March 2013

363 bytes removed ,  01:05, 14 March 2013
no edit summary
 
Line 1: Line 1:
[[Category:Actuators, Drives]]{{Knoppen}}
[[Category:Actuators, Drives]]{{Knoppen}}
<noinclude><!------------------------------------------------
* READ THIS FIRST
* Only edit this page if you can improve the content.
* Improper use of this page will lead to permanent banning.
* Please do not edit the sponsored link on the top right corner.
* Please start editing this page after the /noinclude
* -------------------------------------------------></noinclude>
[[File:Driving Drum.jpg|thumb|right|Driving Drums]]
[[File:Driving Drum.jpg|thumb|right|Driving Drums]]
[[File:Driving drum2.jpg|thumb|right|Driving Drums]]
[[File:Driving drum2.jpg|thumb|right|Driving Drums]]
'''Driving Drums''' put in motion the [[Conveyor Belts]] under the action of the [[Drives]]. The working surface of the drum is lined up for the most effective coupling with the belt. The main types of lining-up are: dis mountable rubber, glued rubber or rubber-ceramic, metal-ceramic.
Driving drum is installed at the beginning or at the end of the [[Conveyors]] depending on the technological scheme. It puts the entire conveyor in motion under the action of the gear motor. The working surface of the drum is lined up for the most effective coupling with the belt.


'''Driving Drums''' put in motion the [[Conveyor Belts]] under the action of the [[Drives]]. The working surface of the drum is lined up for the most effective coupling with the belt. The main types of lining-up are: dis mountable rubber, glued rubber or rubber-ceramic, metal-ceramic .
 
Driving drum is installed at the beginning or at the end of the [[Conveyors]] depending on the technological scheme. It puts the entire conveyor in motion under the action of the gear motor. The working surface of the drum is lined up for the most effective coupling with the belt.
==Applications==
The driving drum is used for transmission of the pull force needed for putting the belt in motion. The driving drums are the elements of the conveyor equipment intended for transportation of cargoes, bulk materials, products and parts in different industries.
The driving drum is used for transmission of the pull force needed for putting the belt in motion. The driving drums are the elements of the conveyor equipment intended for transportation of cargoes, bulk materials, products and parts in different industries.
The set of driving drums includes either one shaft console intended for coupling with the drive mechanism, or two symmetrically placed consoles allowing making coupling of the drum with two mechanisms.
The set of driving drums includes either one shaft console intended for coupling with the drive mechanism, or two symmetrically placed consoles allowing making coupling of the drum with two mechanisms.
There are different designs and schedule-sizes of driving drums. Their characteristics and schedule-sizes depend on the following parameters: belt width, work load, center shaft diameter for bearing and bolt diameter, console and keyed connection size, total weight and the weight of the rolling elements. Besides that the driving drums may be smooth or lined-up.
There are different designs and schedule-sizes of driving drums. Their characteristics and schedule-sizes depend on the following parameters: belt width, work load, center shaft diameter for bearing and bolt diameter, console and keyed connection size, total weight and the weight of the rolling elements. Besides that the driving drums may be smooth or lined-up.
Retrieved from "https://www.solidswiki.com/index.php/Special:MobileDiff/15463"

Navigation menu