Explosion Detection Systems

From SolidsWiki
Jump to navigation Jump to search


Explosion Detection Systems and Control Systems are pre-configured to recognize danger signs and make important decisions about when to activate explosion isolation and/or explosion suppression systems, effectively preventing an explosion from damaging your equipment and facility.

Explosion Detection Systems

An Explosion detector is one element in a complete explosion protection system. There are wide range of detectors using the latest detection technology for the quickest response times for flame, pressure and spark detection. Depending on the process application and the type of gases or solids being run in the process will determine the type of explosion detector required in an explosion protection system.


Common Types

UVIR Flame Detector

UVIR Flame Detector detects ultraviolet and infrared light emitted from a flame source.

Infrared Flame and Spark Detector

Infrared Flame and Spark Detector used for the detection of flames and sparks in closed systems such as ducts, pneumatic transport pipes and conveying lines.

Static Explosion Pressure Detector

Static Explosion Pressure Detector a low inertia detector that incorporates a highly sensitive stainless steel diaphragm providing a millisecond response time.

Dynamic Explosion Detector

Dynamic Explosion Detector designed for demanding explosion protection applications requiring state-of-the-art rate of rise pressure sensing.