Pressure Swing Dryers

From SolidsWiki
Jump to navigation Jump to search


The Pressure Swing Dryers are designed specifically for calibration applications.

Pressure Swing Dryers


Working Process

It utilises two desiccant columns of molecular sieve and operates on the pressure-swing principle. The columns are used alternately and a small quantity of dry air is bled from the in-service column to re-generate the line column. Moisture is absorbed at elevated pressure whilst re-generation occurs at atmospheric pressure, hence the term 'pressure-swing'. The columns are automatically switched on a two minute cycle. The PSD-2 dryer operates continuously and desiccant life is normally in excess of five years. Using oil-free compressed air at 7 barg the PSD-2 delivers up to 10 l/min of air at a dew point of better than -75°C.