Difference between revisions of "Safety Heads"
(Created page with "Category:Explosion Safety{{Knoppen}} <noinclude><!------------------------------------------------ * READ THIS FIRST * Only edit this page if you can improve the content. * ...") |
PurplePen19 (talk | contribs) |
||
| Line 7: | Line 7: | ||
* Please start editing this page after the /noinclude | * Please start editing this page after the /noinclude | ||
* -------------------------------------------------></noinclude> | * -------------------------------------------------></noinclude> | ||
This | [[File:Safety Heads.jpg|thumb|200px|right|Safety Heads]] | ||
'''Safety Heads''' commonly come in three series compatible in orifice sizes and maximum pressure ratings with Autoclave low, medium and high-pressure valves, fittings and tubing. | |||
==High Pressure Safety Heads up to 60,000 PSI== | |||
The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. | |||
Outlet connections are 3/8" pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 90 foot pounds, depending upon pressure and media being used. | |||
Material of body and hold down nut is high tensile 316 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. | |||
==Common Applications== | |||
*Gas | |||
*Liquid | |||
*Fluid handling for the chemical/petrochemical, research, and oil and gas industries | |||
==Typical Advantages== | |||
===Reduced Inventory Costs=== | |||
One head fits most standard international flanges eliminating the need to stock unnecessary and costly inventory. | |||
===Simple, Fail-Safe Installation=== | |||
The asymmetric locating pins and standard welded J-Bolt ensure correct orientation by eliminating possible human error. | |||
===Easy Cleaning and Inspection=== | |||
Maintenance can be done without replacing the disk due to the pretorqued cap screws, which maintain the clamping load on the disk. | |||
Latest revision as of 04:29, 19 September 2012
Safety Heads commonly come in three series compatible in orifice sizes and maximum pressure ratings with Autoclave low, medium and high-pressure valves, fittings and tubing.
High Pressure Safety Heads up to 60,000 PSI
The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels.
Outlet connections are 3/8" pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 90 foot pounds, depending upon pressure and media being used.
Material of body and hold down nut is high tensile 316 stainless steel. Standard tubing glands and collars are provided unless otherwise specified.
Common Applications
- Gas
- Liquid
- Fluid handling for the chemical/petrochemical, research, and oil and gas industries
Typical Advantages
Reduced Inventory Costs
One head fits most standard international flanges eliminating the need to stock unnecessary and costly inventory.
Simple, Fail-Safe Installation
The asymmetric locating pins and standard welded J-Bolt ensure correct orientation by eliminating possible human error.
Easy Cleaning and Inspection
Maintenance can be done without replacing the disk due to the pretorqued cap screws, which maintain the clamping load on the disk.