Saws

From SolidsWiki
Jump to navigation Jump to search


Saws are any of various tools, either hand-operated or power-driven, having a thin metal blade or disk with a sharp, usually toothed edge, used for cutting wood, metal, or other hard materials.

Saws - Hand Saw
Saws - Reciprocating
Saws - Mechanically operated


Types

Hand saws

Hand-powered saws fall into three divisions, which are defined by the way they hold the blade stiff (a requirement to get an even, clean cut).

A Hand saw uses either simply a blade thick enough to be stiff, or cuts on the pull stroke which reduces the stiffness requirement. This division includes the following specific types of saws:

  • Crosscut saw, for making cuts perpendicular to the grain
  • Rip saw, for cutting along the grain
  • Two-man saw, for cutting large logs or trees
  • Plywood saw, fine-toothed blade to reduce tearing of plywood
  • Veneer saw, two edged saw with fine teeth used to cut veneer
  • Hacksaw, fine-toothed tempered blade under tension for cutting metal, bone, and other hard materials.

Although their use is dwindling the jigsaw and sabre saw (unpowered tools) may also refer to blade style saws.

Mechanically powered saws

Mechanically powered saws mechanically move the teeth past the wood while the saw itself is held stationary. This is accomplished in one of three ways: the teeth are along the perimeter of a flat, circular blade; the blade reciprocates up and down rapidly; or the teeth are along one edge of a continuous band.

Reciprocating saw

Reciprocating saw or sabre saw action similar to a jigsaw, but much larger, more powerful and with a longer stroke with the blade parallel to the barrel. Normally held in both hands, useful for demolition work or for cutting pipe. Sometimes powered by compressed air.


Videos