Difference between revisions of "Automated Batch Dryers"

Jump to navigation Jump to search
no edit summary
 
Line 9: Line 9:
[[File:Automated_Batch_Dryers_1.jpg|thumb|200px|right|Automated Batch Dryers]]
[[File:Automated_Batch_Dryers_1.jpg|thumb|200px|right|Automated Batch Dryers]]
[[File:Automated_Batch_Dryers_2.jpg|thumb|200px|right|Automated Batch Dryers]]
[[File:Automated_Batch_Dryers_2.jpg|thumb|200px|right|Automated Batch Dryers]]
The '''Automated Batch Dryers''' follows a certain working principle, which is commonly known as Automated Batch Drying System. The Automated Batch Drying System combines highly efficient fluidised  bed drying with ‘single batch containment’ advantages. This system is  especially used for combined coating/ drying of pelleted product. If  pelleting time for example is 15-20 minutes, an accumulated 4 batches  can be dried in about 60-80 minutes. Systems of 60 – 600 ltr. per batch  are available. This results in fully automated coating/ drying systems  with a capacity of 120 – 1800 ltr per hour coating/ drying capacity.    Another huge advantage of the design is that real-time weighing can take  place during the drying in order to have absolute and continuous  moisture control independent of often inaccurate in line/real time  humidity control. The dryer empties out 100% because it rotates 180 degrees so there is no cross contamination between batches!    Normally vibrating fluidised bed systems are, when compact, extremely costly or when simply built (reciprocating drive) extremely long. The  e&e Automated Batch Drying System is extremely compact, efficient  and moderate in cost.
The '''Automated Batch Dryers''' follows a certain working principle, which is commonly known as Automated Batch Drying System. The Automated Batch Drying System combines highly efficient fluidised  bed drying with ‘single batch containment’ advantages. This system is  especially used for combined coating/ drying of pelleted product. If  pelleting time for example is 15-20 minutes, an accumulated 4 batches  can be dried in about 60-80 minutes. Systems of 60 – 600 ltr. per batch  are available. This results in fully automated coating/ drying systems  with a capacity of 120 – 1800 ltr per hour coating/ drying capacity.    Another huge advantage of the design is that real-time weighing can take  place during the drying in order to have absolute and continuous  moisture control independent of often inaccurate in line/real time  humidity control. The dryer empties out 100% because it rotates 180 degrees so there is no cross contamination between batches!    Normally [[Vibrating Fluidized Bed Systems]] are, when compact, extremely costly or when simply built (reciprocating drive) extremely long.  




Navigation menu